Thursday, July 1, 2010

Updated trick for enabling Folder option

Many times Windows users face a common problem. The “Folder Options” in “Tools” menu is not visible. Even It can’t be accessed from Control Panel. Also “Registry Editor” is disabled.
Follow the simple steps mentioned in this tutorial and your problem will be solved:

1. If Folder Options is disabled but Registry Editor is still working in your system, then you can enable Folder Options by editing Windows Registry.
Type regedit in RUN dialog box and press Enter.
it’ll open Registry Editor, now go to following keys:
HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Policies\ExplorerHKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Current Version\Policies\Explorer
In right-side pane, check whether a DWORD value named NoFolderOptions exists or not? If it exists, delete it.

2. If you are not familiar with editing the registry, then you can simply download following file, extract it and then run the .REG file:
Folder_option.zip

Secret Codes for Nokia

Codes :
1) *#06# For checking IMEI(international Mobile Equipment Identity)
2) *#7780# Reset to factory settings
3) *#0000# To view software version
4) *#2820# Bluetooth device address
5) *#746025625# Sim clock allowed status
6) #pw+1234567890+1# Shows if ur sim as any restrictions

Multiple Logins in yahoo without Software

1) Go to Start
2) Navigate to HKEY_CURRENT_USER-->Software-->Yahoo-->Pager-->Test
3)ON the Right side if the page , Right click and choose new Dword Value.
4) Rename it as " Plural ".
5)Double click and assign a decimal value of 1.
6) Now close registry and restar yahoo messenger and try Multiple Login

Wednesday, June 9, 2010

How to access the sharing data offline

Access the shared data offline allows you to keep using your shared files, folders and software programs when disconnected from the data server. When you reconnect to your data server, all files will be synchronized to the files on the network.  
There are two types of configurations required to set the access shared folders offline available, one for data server and other for client computer. 
Configuration on Data Server.

First locate the folders that you would like to share or make new folders then share these folders so they can be accessible to any one on the network.
Now right click on that folder and click on the option "Sharing and security".

A small dialog box will appear with the title "data properties". Under the "Sharing" tab, select the check box "Share this folder on the network" under the "Network sharing and security".

Now set the share level permissions that you want to give the users on every folder. Enable cache of share folders by click on cache button (by default it will be enabled).

Configuration on Client Computer 
On the client computer, first open My Computer then click on Tools.
In Tools menu bar, click on Folder Options, a window will appear with the title Folder Options.
Under the Offline File tab, check the option Enable Offline File. Here you can choose the synchronization process "Synchronize all offline files when logging on", "Synchronize all offline files before logging off" and others.

Click on Apply button to save the settings and then Ok button to close this window.
Now sitting on the client computer, try to access the shared folder from the data server.
First Right click on the shared folder and Click on Make available offline.
To synchronizing the offline work from client computer to data server, again open My Computer then click on Tools. Click on Synchronize then click on synchronizing button.
 

After that down to data server and then try to access share folders by give the UNC (Universal Naming Convention) path of data server. But it will be accessible weather the server is down or up.

Connecting an Xbox 360 to a Wireless Router

Connecting an Xbox 360 to a wireless router allows you to use Xbox Live without physically connecting your Xbox to a cable. Power up your Xbox system and the router, then plug the wireless networking adapter into the two slots at the Xbox's rear. Unplug any existing Ethernet cables and connect the USB connector to the port adjacent to the adapter. Use the system area of the Xbox dashboard to adjust your network settings. This should connect you to the wireless network.

Wednesday, March 17, 2010

V9H79ZJ4QRRC

Monday, March 15, 2010

How to Restart Windows without Restarting your PC

When you click on the SHUTDOWN button,
make sure to simultaneous press SHIFT Button.
If you hold the Shift key down while clicking on SHUTDOWN button,
you computer would restart without restarting the Computer.
This is equivalent to term "HOT REBOOT".

Control Your Mouse Through Keyboard

This is for all computer professionals and programmers who have arm problems due to continuous use of mouse.U can easily control your mouse from the numeric pad of keyboard.All u have to do is this!!!

Microsoft Windows users can enable
the accessibility feature to move the
mouse using their arrow keys by following the 
below steps.
  1. Click Start, Settings, Control Panel.
  2. Within the Control Panel open Accessibility Options 
  3. Click the Mouse tab.
  4. Check the "Use Mouse Keys" check box.
  5. If you wish to increase the speed or 
  6. change any other settings, 
  7. click on the Settingsbutton.
  8. Click Apply and then close out of the box.
After performing the above steps you will be able to used 
the numeric keypad 
as a mouse moving up, down, left, right, and all the diagonals. 
In addition, you may also use the center "5" key as a left click.
Note: You must have the Number lock on for this feature 
to work by default. 
This can be changed through the settings.

Sunday, March 14, 2010

Increase the life of ur dvd rom

This is an interesting one!!!

This is for those who watch movies on their computer's dvd rom drive!!!
There is a software called dvd idle pro which can really increase the life of your dvd drive. By using the Smart Read-ahead Cache,
DVDIdle saves DVD data which will be played soon onto the hard disk cache or RAM cache, and
then feeds it to DVD player.
This allows the DVD drive to rest.

For example:
a 6X-speed DVD drive will only work for 15 minutes when you are watching a 90 minutes DVD
movie.
here is the link: http://www.dvdidle.com/download/DVDIdlePro59.exe

Chat With Command Prompt


If you want personal chat with a friend
you don't need to download any yahoo messenger
All you need is your friends IP address and Command Prompt.
Firstly, open Notepad and enter:
@echo off
:A
Cls
echo MESSENGER
set /p n=User:
set /p m=Message:
net send %n% %m%
Pause
Goto A
Now save this as "Messenger.bat". Open the .bat file and in Command
Prompt you should see:
MESSENGER
User:
After "User" type the IP address of the computer you want to contact.
After this, you should see this:
Message:
Now type in the message you wish to send.Before you press "Enter" it should look like this:
MESSENGER
User:27.196.391.193
Message: Hi
Now all you need to do is press "Enter", and start chatting!

Friday, February 26, 2010

How to find the IP address of the sender in Gmail

How to find the IP address of the sender in Gmail
When you receive an email, you receive more than just the message. The email comes with headers that carry important information that can tell where the email was sent from and possibly who sent it. For that, you would need to find the IP address of the sender. The tutorial below can help you find the IP address of the sender. Note that this will not work if the sender uses anonymous proxy servers.

Finding IP address in Gmail:

1.Log into your Gmail account with your username and password.

2. Open the mail.

3. To display the headers,* Click on More options corresponding to that thread. You should get a bunch of links.* Click on Show original.

4. You should get headers like this:Gmail headers : nameLook for Received: from followed by a few hostnames and an IP address between square brackets. In this case, it is65.119.112.245.That is be the IP address of the sender!

5. Track the IP address of the sender.

How to find the IP address of the sender in Hotmail

When you receive an email, you receive more than just the message. The email comes with headers that carry important information that can tell where the email was sent from and possibly who sent it. For that, you would need to find the IP address of the sender. The tutorial below can help you find the IP address of the sender. Note that this will not work if the sender uses anonymous proxy servers.
Finding IP address in Hotmail
1. Log into your Hotmail account with your username and password.
2. Click on the Mail tab on the top.
3. Open the mail.
4. If you do not see the headers above the mail message, your headers are not displayed. To display the headers,
* Click on Options on the top-right corner
* In the Mail Options page, click on Mail Display Settings
* In Message Headers, make sure Advanced option is checked
* Click on Ok button
* Go back to the mails and open that mail.

5. If you find a header with X-Originating-IP: followed by an IP address, that is the sender's IP addressHotmail headers : name ,In this case the IP address of the sender is [68.34.60.59]. Jump to step 9.
6. If you find a header with Received: from followed by a Gmail proxy like thisHotmail headers : nameLook for Received: from followed by IP address within square brackets[].In this case, the IP address of the sender is [69.140.7.58]. Jump to step 9.
7. Or else if you have headers like thisHotmail headers : nameLook for Received: from followed by IP address within square brackets[].In this case, the IP address of the sender is [61.83.145.129] (Spam mail). Jump to step 9.
8. * If you have multiple Received: from headers, eliminate the ones that have proxy.anyknownserver.com.
9. Track the IP address of the sender

How to find the IP address of the sender in Yahoo! mail

When you receive an email, you receive more than just the message. The email comes with headers that carry important information that can tell where the email was sent from and possibly who sent it. For that, you would need to find the IP address of the sender. The tutorial below can help you find the IP address of the sender. Note that this will not work if the sender uses anonymous proxy servers.

Finding IP address in Yahoo! Mail

1. Log into your Yahoo! mail with your username and password.
2. Click on Inbox or whichever folder you have stored your mail.
3. Open the mail.
4. If you do not see the headers above the mail message, your headers are not displayed. To display the headers,
* Click on Options on the top-right corner
* In the Mail Options page, click on General Preferences
* Scroll down to Messages where you have the Headers option
* Make sure that Show all headers on incoming messages is selected
* Click on the Save button
* Go back to the mails and open that mail.
5. You should see similar headers like this:Yahoo! headers : nameLook for Received: from followed by the IP address between square brackets [ ]. Here, it is 202.65.138.109.That is be the IP address of the sender!
6. Track the IP address of the sender

Keeping the Windows XP Core in the RAM

If you have 512 MB or more of RAM, you can increase system performance by having the Windows XP 'Core' kept in the RAM instead of paged on the hard disk.

Go to 
Start -> Run - Type regedit and press enter - On the left hand side tree, navigate to
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\

- On the list on the right side, look for an entry called '
DisablePagingExecutive'
- Double click it
- Press 1 on your keyboard
- Click OK
- Exit regedit and reboot the computer

To revert to the default setting, follow the same steps as above, but this time, press 0(zero) instead of 1 on the keyboard.

Wednesday, February 24, 2010

See what Microsoft has to offer in Future!!!

Another Cool Bash Trick!!!


Process Substitution


This trick allows you to use a process *almost* anywhere you can use a file. To illustrate, let's consider the 
diff command. Most versions of diff require you to pass exactly two file names as arguments. But what if we want to diff something, like the contents of a directory, that doesn't necessarily exist in a file? This is where we can use process substitution. For example, to diff the contents of two directories, you could use:

diff <(find dir1) <(find dir2)

The syntax 
<(command) creates a named pipe, and attaches command's STDOUT to the pipe. So, anything that reads from the pipe will actually be reading the output of command. To prove this to yourself, try the following:

$ echo <(/bin/true)
/dev/fd/63
$ ls -l <(/bin/true)
lr-x------  1 jgm eng 64 Jul 13 21:50 /dev/fd/63 -> pipe:[31340331]
$ file <(/bin/true)
/dev/fd/63: broken symbolic link to pipe:[31340360]

Similarly, you can use the syntax 
>(command) to have the command read from the pipe. An example is:

tar cvf >(gzip -c > dir.tar.gz) dir

Obviously, there are better ways to accomplish taring and compressing, but the point was to use process substitution.

Cool Bash Trick!!!


The "/dev/tcp" trick


Bash does some super-cool magic when you access 
/dev/tcp/hostname/port. It will create a TCP socket that is connected to the named host on the given port. This lets you easily use network sockets with regular shell IO redirection. For example, the following simply prints the time from NIST:

cat < /dev/tcp/time.nist.gov/13

And YES, you can read AND write to these sockets. Here's how. The following example fetches the source for the www.google.com homepage.

exec 5<> /dev/tcp/www.google.com/80
printf "GET / HTTP/1.0\n\n" >&5
cat <&5
exec 5>&-

New Integrated Chat

Hello To All!!!
Now we have integrated chat in our blog so that u can share new tips and tricks effectively!!!

Thursday, February 18, 2010

Tips to recover scratched CD's

1. Spread a cloth on a flat surface and place the CD on it.
2. Then, hold the disc with one hand, use the other to wipe the polish into the affected area with a soft cloth.
3. Wait for it to dry and buff using short, brisk strokes along the scratch, not across it.
4. A cloth sold to wipe spectacles or camera lenses will work super m8's.
5. When you can no longersee the scratch,, wash the disc with water and let it dry before playing. Intersting isnt it? Try it right now
I have used toothpaste with good effects before Ive also used car paint cutting compound on deeper scratches. It does leave lots of smaller scratches (as it is a cutting compound after all) but it will remove the worst scratches in most cases.
ya u r gng to b surely befinited by this Operation

* Fingermarks/prints cause 43% of disc problems!
* General wear & tear causes 25% of disc problems!
* Player-related issues cause 15% of disc problems!
* Remaining Others

Add Your Name (or) Application to right click Of My Computer

Caution ..
As it is related to Windows regisrty it can be dangerous
so,Try This at ur own risk 


To write your name on right click application
please follow the steps.
1.Copy/Paste the following code in Notepad And then Save it as .reg 

Windows Registry Editor Version 5.00 
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor] 
@="Your Name Or Name of the Application" 
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor\command] 
@="Location Of The Application"

2.
Now edit it and then Type your name In 

Eg:

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor] 
@="Rajesh" 

3. If u want to get any application, once you click Your name or name of application
Then , Type the location Of the application Which u want to open In: 

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor\command] 
@="Location Of The Application"

For eg.C:\Program Files\Yahoo!\Messenger\messenger.exe
Thats It finally save it And then Run it .


------------------------------------------------------------
To add Application Control Panel

[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Control Panel\command]
@="rundll32.exe shell32.dll,Control_RunDLL"

To add Application Add/Remove 

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Add/Remove\command]
@="control appwiz.cpl"

To add Application Reboot

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\[Reboot]\command]
@="shutdown -r -f -t 5"

To add Application Shutdown

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\[Shutdown]\command]
@="shutdown -s -f -t 5"

Wednesday, February 17, 2010

Linux Basic Commands

Ok this time m back with some programmer stuff!!!Here is a list of basic Linux commands Very usefull i suppose!!!

For changing directory / to /etc
[root@pc1 /]# cd /etc
 
One step back /etc to /
[root@pc1 etc]# cd ..
 
Go to previous working directory
[root@pc1 /]# cd -
 
Go to current login user home directory
[root@pc1 etc]# cd ~
 
Show the contents of /etc in single color
[root@pc1 ~]# dir /etc
 
Show the contents of /etc in different colors with nature of contents
[root@pc1 ~]# Ls /etc
 
create a folder on root partition
[root@pc1 ~]# mkdir /disk
 
Create a folder in /disk
[root@pc1 ~]# mkdir /disk/dir
 
Create multiple folder in multiple directories with single command
[root@pc1 ~]# mkdir /etc/dir1 /var/dir2 /usr/dir3
 
Create multiple folder in same directory
[root@pc1 ~]# mkdir dir1 dir2 dir3
 
Copy a file in directory
[root@pc1 disk]# cp file dir
 
Copy a file from /disk/file and paste it in /disk/dir/
[root@pc1 disk]# cp /disk/file /disk/dir
 
Copy a directory with –r option
[root@pc1 disk]# cp -r dir dir2
 
Copy a file from /disk/file and paste it in /etc with myfile name
[root@pc1 disk]# cp /disk/file /etc/myfile
 
Remove a file
[root@pc1 disk]# rm file
 
Remove a file with forcefully option
[root@pc1 disk]# rm –f file
 
Remove a directory with out –r option and you face will an error
[root@pc1 disk]# rm dir
 
Remove a directory with –r option
[root@pc1 disk]# rm -r /disk
 
Remove a directory with forcefully option
[root@pc1 disk]# rm -rf dir
 
Move /etc/dir1 to /disk/ with different name
[root@pc1 disk]# mv /etc/dir1 /disk/mydir
 
Rename the folder name mydir to dir
[root@pc1 disk]# mv /disk/mydir /disk/dir
 
Rename the file name with myfile
[root@pc1 disk]# mv file myfile
 
Read a file page by page with less command
[root@pc1 disk]# less /etc/grub.conf
 
Read a file page by page with more command
[root@pc1 disk]# more /etc/qrub.conf
 
Read first ten lines of grub.conf
[root@pc1 disk]# head /etc/grub.conf
 
Read last ten lings of grub.conf
[root@pc1 disk]# tail /etc/grub.conf
 
Read first 12 lines with –n option
[root@pc1 disk]# head -n 12 /etc/grub.conf
 
Read last 11 lines with –n option
[root@pc1 disk]# tail -n 11 /etc/grub.conf
 
Copy the contents of /etc/grub.conf in /disk/file
[root@pc1 disk]# cat /etc/grub.conf > /disk/file
 
Append the contents /etc/mtab in /etc/file
[root@pc1 disk]# cat /etc/mtab >> /disk/file
 
Merging tow commands with pipe sign output of the first command is input of second command
[root@pc1 disk]# cat /etc/squid/squid.conf I more
 
Count the total lines of squid.conf
[root@pc1 disk]# cat /etc/squid/squid.conf I wc -L
 
Show only spool words in squid.conf
[root@pc1 disk]# cat /etc/squid/squid.conf I grep spool
 
Flush the contents of file
[root@pc1 disk]# cat /dev/null > /var/log/messages